Please configure

5G Spark Smart Modem- How to set up your WiFi for guests

Learn how to set up a guest WiFi network on your 5G Spark Smart Modem. Guest WiFi networks are a great way to offer your house guests easy access to the Internet without also giving them access to your LAN, computers, printers and other WiFi connected devices.

  1. Open any web browser such as Chrome, Firefox, Edge.
  2. In the address bar, type 192.168.1.254 and press enter.
  3. Enter your modem login information and click Login. By default, the User name and Password will both be admin. This information is also located on the bottom of your modem.
  4. Click WLAN from the left hand side.
  5. Click Guest WLAN from the menu bar on the top.
  6. Under Wireless 2.4GHz, click Edit. If you wish to enable guest access on the 2.4 GHz frequency.
  7. Click the slider, to enable WiFi Name Enable
  8. Enter your WiFi network name in the Network Name (SSID) field, the select an Authentication Method from the dropdown menu.
  9. Enter a password (if you wish to have one) on the WPA pass-phrase field.
  10. Guest WiFi network setup image

  11. Click Save Settings.
  12. Repeat steps 6 to 10 for the for Wireless 5GHz, if you wish to also enable guest access on the 5GHz frequency.

You have successfully set up a guest WiFi network on the Spark Smart Modem.

Learn more

Was this article helpful to you?
Thanks for your feedback.
Thanks for your feedback.